Smith-cooper International 8170l Series Brass Ball Valve For Potable Water Service, Inline, Lever Handle, 2" Npt Female

Melhor Oferta

USD 75.3

amazon


Comerciantes e ofertas

Estamos à procura de 10.000 comerciantes para encontrar as melhores ofertas disponíveis, se houver alguma informação incorreta, por favor deixe-nos saber

estado:
- validado: Conectado com êxito para o comerciante, o preço é atualizado
- não recente: O produto não está em estoque ou preço não é recente
- Sobre o preço: Este preço oferecido é muito maior do que faixa de preço normal,
- preço muito baixo: Este preço oferecido é muito menor do que faixa de preço normal,
- Não acessível: Não é capaz de conectar-se a este comerciante neste momento
Merchants
Preço
O dinheiro economizado
estado
Atualizada
Loading...
Nós com base no produto faixa de preço normal ou venda referência de preço para calcular a poupança
Envio internacional
Detalhes do produto
Tamanho2 Inches Npt Female
Tipo de ProdutoMechanical components
De MarcaSmith-cooper International
Número do modelo01728170nl
FabricanteSmith-cooper International

  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Lever handle for manual on/off control
  • PTFE seats and stem packing reduce the risk of leakage
  • Maximum pressure rating of 600 psig for WOG and 150 psig for WSP
  • Female NPT threads for connecting to male threaded pipes

the smith-cooper international 8170l series brass inline ball valve for potable water service has a lever handle & national pipe taper (npt) female threads on both ends. This valve body is made of brass for corrosion resistance, ductility at high temperatures, & low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, & welded steel. This valve has a lever handle for manual onoff control. Polytetrafluoroethylene (ptfe) seats reduce the risk of leakage. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to for maximum operating efficiency. This valve has female npt threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum pressure rating is 600 pounds per square inch (gauge) (psig) for water, oil, & gas (wog), & 150 psig for working steam pressure (wsp). This valve meets the following standards for quality assurance: american national standards instituteamerican society for testing & materials (ansiasme) b16.33; manufacturers standardization society (mss) sp110; & national sanitation foundationamerican national standards institute (nsfansi) 61.8 for low lead.

ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet & outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) & is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball's position (open or closed) for manual operation. They are primarily used in air, gas, liquid, & steam applications.

smith-cooper manufactures a wide variety of pipe fittings & valves. The company is headquartered in commerce, california, & meets relevant ansi, astm, & international organization for standardization (iso) 9002 standards.

Marca
Smith-cooper International
Produto Desta Marca
Produto Desta Categoria